| EC-200-2.5
Saw Features
- With the speed of 18,000 to 20,000
RPM, this saw is ideal for
cutting non-ferrous material using carbide tipped
saw blades
- Small, compact, yet powerful
- Handle specially designed for comfort
and stability when guiding the tool
- Safety guard retracts to cover blade
at end of cut
- Slot on side of safety guard makes
it easy to mount a vacuum attachment
- The guide line on the extended front
of the guard gives the operator
clear vision to follow scribed line
- Unique locking device when changing
blade
- Simple but effective depth control
- Low maintenance (no angle gears)
|
Model
|
Free Speed
(RPM)
|
Blade* Capacity
|
Length (Inches)
|
Width (Inches)
|
Weight (Lbs.)
|
Minimum Hose
Size (Inches)
|
Air Intake
(FPT)
|
Maximum Cut
Depth (Inches)
|
Arbor Diameter (Inches)
|
|
EC-200-2.5
|
20,000
|
2 ½
|
7 1/4
|
5 1/2
|
3
|
5/16
|
1/4
|
0 - 1/2
|
7/16
|
| * Blade not
included |
back to top
EC-200-2.5 Product Illustration 
click to enlarge
back to top
EC-200-2.5
Saw Parts List
| Index |
Part
# |
Previous
Part # |
Description |
Quantity |
| 1 |
EC 2010 |
EC 201 |
End Cap |
1 |
| 2 |
EC 2020 |
EC 202 |
Bearing, Rear |
1 |
| 3 |
EC 2030 |
EC 203 |
Bearing Plate, Rear |
1 |
| 4 |
EC 3162 |
EC 204 |
Cylinder Pin |
1 |
| 5 |
EC 2050 |
EC 205 |
Cylinder |
1 |
| 6 |
EC 2060 |
EC 206 |
Rotor |
1 |
| 7 |
EC 2070 |
EC 207 |
Rotor Blade |
4 |
| 8 |
EC 2080 |
EC 208 |
Rotor Collar |
1 |
| 9 |
EC 2090 |
EC 209 |
Bearing Plate, Front |
1 |
| 10 |
EC 2100 |
EC 210 |
Bearing, Front |
1 |
| 11 |
EC 2110 |
EC 211 |
Handle |
1 |
| 12 |
EC 2120 |
EC 212 |
O-Ring |
1 |
| 13 |
EC 2450 |
EC 213 |
Spring Screw (short) |
1 |
| 13 |
EC 2220 |
EC 222 |
Spring Screw (long) |
1 |
| 14 |
EC 2140 |
EC 214 |
Spring |
1 |
| 20 |
EC 2205 |
EC 220-2.5 |
Slide |
1 |
| 21 |
EC 2215 |
EC 221-2.5 |
Cutter Housing |
1 |
| 22 |
EC 2220 |
EC 222 |
Cutter Housing Screw |
3 |
| 23 |
EC 2230 |
EC 223 |
Muffler |
1 |
| 24 |
EC 2245 |
EC 224 |
Motor Housing |
1 |
| 25 |
EC 2255 |
EC 225 |
Guide |
1 |
| 26 |
EC 9995 |
EC 226 |
Lock Screw |
1 |
| 27 |
EC 2270 |
EC 227 |
Screw |
4 |
| 28 |
EC 2280 |
EC 228 |
Cutter Adapter |
1 |
| 29 |
EC 2290 |
EC 229 |
Cutter Retainer |
1 |
| 30 |
EC 2300 |
EC 230 |
Cutter Screw |
1 |
| 31 |
EC 8718 |
EC 231 |
Throttle Lever Pin |
1 |
| 32 |
EC 8729 |
EC 232 |
Throttle Lever |
1 |
| 33 |
EC 2330 |
EC 233 |
Throttle Body |
1 |
| 34 |
EC 8728 |
EC 234 |
Bushing |
1 |
| 35 |
EC 8726 |
EC 235 |
O-Ring |
1 |
| 36 |
EC 8727 |
EC 236 |
Plunger |
1 |
| 37 |
EC 8722 |
EC 237 |
Valve Seat |
1 |
| 38 |
EC 8723 |
EC 238 |
Steel Ball |
1 |
| 39 |
EC 8725 |
EC 239 |
Spring |
1 |
| 40 |
EC 3110 |
EC 240 |
Air Screen |
1 |
| 41 |
EC 3109 |
EC 241 |
Gasket |
1 |
| 42 |
EC 2420 |
EC 242 |
Hose Adapter |
1 |
| 43 |
EC 8724 |
EC 239-B |
Retainer |
1 |
| 44 |
EC 2235 |
EC 223-B |
Screw |
2 |
| # |
EC 2335 |
|
Throttle Body Spacer |
1 |
| Stop Assembly
(not shown on drawing) |
|
1 |
| # |
EC 2145 |
|
Spacer |
1 |
| # |
EC 2165 |
|
Stop Screw |
1 |
| # |
EC 2175 |
|
Nut |
1 |
| # |
EC 2185 |
|
Stop Bracket |
1 |
| # |
EC 2220 |
EC 222 |
Screw |
2 |
|
# Not shown on drawing
back to top
EC-200-2.5 Saw Service & Maintenance Instructions
Operation:
The tool is designed to operate
on 90 PSI air pressure using a 3/8 inch hose up
to 8 feet in length. If additional hose is required,
a 1/2 inch or larger hose should be connected
to the 3/8 inch hose.
Lubrication:
An automatic in-line filter lubricator
is highly recommended to increase tool life as
well as keeping the tool in sustained operation.
If in-line lubricator is not used, the tool should
be lubricated several times daily by disconnecting
the air hose and injecting a few drops of a high
grade No. 10W machine oil in the air inlet. |
back to top
Product
Safety Warnings
For Your Safety make
sure you apply standard shop
practices at all times when
using this tool. Your failure to apply
these practices may result in serious bodily injury.
Protect your eyes, ears,
and other parts of your body by using safety equipment;
to include Respirator, Safety Goggles, Ear Mufflers
and other necessary safety devices at all times when
operating this tool or when you are in the area where
this tool is being operated.
For maximum stability and safety,
operate this tool only with both hands on the tool.
Follow the cutting tool manufacturer’s mounting
and operating instructions and avoid any direct contact
with the sharp cutting edges of the tool.
Modification or improper use
of this tool, including, but not limited
to, removing guards, mufflers, or other safety devices, voids
all responsibilities of the manufacturer.
Excessive air pressure,
over and above 90 PSI, will increase the RPM,
the sound level, and can be a damaging factor to both
the operator and the tool.
Stay alert! Watch what you are
doing! Do not operates this tool when under the influence
of medication, alcohol, or drugs!
Disconnect the air supply before
changing the cutter and whenever making adjustments
or repairs.
Do not remove warning
tags until both sides have been read and understood
by the person(s) responsible for safety in your plant.
If you need any other information, consult
your supervisor or contact:
E-C Eng. & Mfg., Inc.
P.O. Box 1090
Mountain Home, AR 72654-1090
Phone: (870) 425-3979
Fax: (870) 424-2228
Email: info@ecengmfg.com
back to top |
