|
E-C-250 Router
Features
- Designed with a lever throttle for
safety, extra length for precise
control in two-hand operation
- To minimize unintentional start-up,
but still have an instant shut
off of the air supply, the lever on the throttle
body has built-in resistance
- The router nose is easily adjustable
for different cutting depth
- The shank of the router bit is supported
by a high quality bearing
in front of the router nose
- The EC 2206 nose has a 1/2-20 I.D.
Thread and the EC 2207 nose
has a 5/8-18 I.D. Thread to accept standard router
guide
- Front exhaust directs the exhausted
air toward the work, removing the
chips from the material being routed
|
Speed
(RPM)
|
Length
(Inches)
|
Diameter
(Inches)
|
Weight
(Lbs.)
|
Collet Sizes
(Inches)
|
Minimum
Hose Size
|
Air Intake
(FPT)
|
Exhaust
|
25,000
|
9 3/4
|
1 1/2
|
2
|
1/4 3/8
|
3/8
|
1/4
|
Front
|
 back
to top
EC-250 Product Illustration
click to enlarge
back
to top
EC-250 Router Parts List
| Index |
Part # |
Previous
Part #
|
Description |
Quantity |
| 1 |
See Chart Below
|
Nose |
1 |
| 2 |
See Chart Below |
Bearing |
1 |
| 3 |
See Chart Below |
Retaining Ring |
1 |
| 4 |
EC 8700 |
|
Collet Nut |
1 |
| 5 |
See Chart Below |
Collet |
1 |
| 6 |
EC 2522 |
25202 |
Collet Spindle |
1 |
| 7 |
EC 2523 |
25203 |
Bearing Retainer |
1 |
| 8 |
EC 9093 |
|
Bearing |
1 |
| 9 |
EC 9376 |
619376 |
Retaining Ring |
1 |
| 10 |
EC 2100 |
EC 210 |
Bearing |
1 |
| 11 |
EC 2524 |
25204 |
Front Bearing Housing |
1 |
| 12 |
EC 2525 |
25205 |
Lock Ring |
1 |
| 13 |
EC 2520 |
25200 |
Motor Housing |
1 |
| 14 |
EC 2070 |
EC 207 |
Rotor Blade |
1 |
| 15 |
EC 2060 |
EC 206 |
Rotor |
1 |
| 16 |
EC 2050 |
EC 205 |
Cylinder |
1 |
| 16 |
EC 3162 |
EC 204 |
Cylinder Pin (Not Shown) |
1 |
| 17 |
EC 2030 |
EC 203 |
Rear Bearing Plate |
1 |
| 18 |
EC 2020 |
EC 202 |
Bearing |
1 |
| 19 |
EC 2310 |
EC 231 |
Throttle Lever Pin |
1 |
| 20 |
EC 2320 |
EC 232 |
Throttle Lever |
1 |
| 21 |
EC 8722 |
|
Valve Seal |
1 |
| 22 |
EC 2360 |
EC 236 |
Plunger |
1 |
| 23 |
EC 2340 |
EC 234 |
Bushing |
1 |
| 24 |
EC 2350 |
EC 235 |
O-Ring |
1 |
| 25 |
EC 2380 |
EC 238 |
Steel Ball |
1 |
| 26 |
EC 8724 |
EC 239B |
Retainer |
1 |
| 27 |
EC 2201 |
25201 |
Throttle Body |
1 |
| 28 |
EC 2390 |
EC 239 |
Spring |
1 |
| 29 |
EC 2400 |
EC 240 |
Air Screen |
1 |
| 30 |
EC 2410 |
EC 241 |
Washer |
1 |
| 31 |
EC 2420 |
EC 3102 |
Hose Adapter |
1 |
| 32 |
EC 2080 |
EC 208 |
Rotor Collar |
1 |
|
Chart for Nose Assembly
|
|
Collet
|
Nose
|
Ball
Bearing
|
Retaining
Ring
|
Nose
Thread
|
| 1/4 |
EC 8703
|
EC 2206 (previously
25206)
|
EC 9015
|
EC 9016
|
1/2 – 20
|
| 3/8 |
EC 8705
|
EC 2207 (previously
25207)
|
EC 9019
|
EC 9017
|
5/8 – 18
|
back
to top
EC-250 Router Service & Maintenance
Instructions
Operation:
The tool is designed to operate
on 90 PSI air pressure using a 3/8 inch hose
up to 8 feet in length. If additional hose is
required, a 1/2 inch or larger hose should be
connected to the 3/8 inch hose.
Lubrication:
An automatic in-line filter lubricator
is highly recommended to increase tool life as
well as keeping the tool in sustained operation.
If in-line lubricator is not used, the tool should
be lubricated several times daily by disconnecting
the air hose and injecting a few drops of a high
grade No. 10W machine oil in the air inlet.
Disassembly:
Remove Nose Assembly: Clamp the
throttle body EC 2201 in a vise with the tool
in a vertical position and remove Nose Assembly
using a suitable spanner wrench.
Remove Motor Housing: Unscrew (right
hand threads) the bearing retainer EC 2523. The
motor housing EC 2520 may now be unscrewed from
the throttle body EC 2201 with the aid of a strap
wrench, if necessary.
Change Rotor Blades: If the reason
for disassembling the tool is to change the EC
2070 rotor blades, use a 1/4 or 5/8 inch brass
or aluminum rod and remove the EC 2020 bearing
and EC 2030 rear bearing plate from the rotor
EC 2060. By sliding EC 2050 cylinder off the
rotor, the rotor blades, EC 2070, can now be
replaced.
Remove Collet Spindle: To remove
the EC 2522 collet spindle or either of the EC
9093 or EC 2100 bearings, insert a 3/16 inch
allen wrench into the opening of the EC 2522 collet
spindle and unscrew the collet spindle from the
rotor. Now the bearings can be removed from the
rotor.
|
back
to top
Product Safety Warnings
For Your Safety make
sure you apply standard shop
practices at all times when
using this tool. Your failure to apply
these practices may result in serious bodily injury.
Protect your eyes, ears,
and other parts of your body by using safety equipment;
to include Respirator, Safety Goggles, Ear Mufflers
and other necessary safety devices at all times when
operating this tool or when you are in the area where
this tool is being operated.
For maximum stability and safety,
operate this tool only with both hands on the tool.
Follow the cutting tool manufacturer’s mounting
and operating instructions and avoid any direct contact
with the sharp cutting edges of the tool.
Modification or improper use
of this tool, including, but not limited
to, removing guards, mufflers, or other safety devices, voids
all responsibilities of the manufacturer.
Excessive air pressure,
over and above 90 PSI, will increase the RPM,
the sound level, and can be a damaging factor to both
the operator and the tool.
Stay alert! Watch what you are
doing! Do not operates this tool when under the influence
of medication, alcohol, or drugs!
Disconnect the air supply before
changing the cutter and whenever making adjustments
or repairs.
Do not remove warning
tags until both sides have been read and understood
by the person(s) responsible for safety in your plant.
If you need any other information, consult
your supervisor or contact:
E-C Eng. & Mfg., Inc.
P.O. Box 1090
Mountain Home, AR 72654-1090
Phone: (870) 425-3979
Fax: (870) 424-2228
Email: info@ecengmfg.com
back
to top
|
